High Power 240v 18watt t8 Led Light Tubes 5500k - 6500k Frosted Cover

In the underground parking, the light is18w LED T8 tube, it is the 3watts to save energy when no body or cars enter in the sensor area. if the tube is installed in 3meters height, the sensor diameter is 6meters,and the beam angle is 120°.when the car enters in the area, the light will be full lighting, and the overtime is in 30 seconds, then down to 3watts after the man is away from the area.

 Quick details:

No RF interference, no flickering, no humming

electric wave resistant, Instant start

can rotate the end cap to be easily installation

Special view angles LED lighting design

With heat protection system, can work under unstable voltage

New inner high efficiency 90% constant current driver

Specification

Application    

Hotels , Hospitals, Commercial Complexes

Conference / Meeting rooms 

Factories & Offices

Residential / Institution Buildings, Schools, Colleges & Universities

Places where need energy saving and high color rendering index lighting

Competitive Advantage:

1. Cheap price

2. Use PC cover and aluminum heat radiator for the led lamp to make the light efficiency in best.

3. Stable performance; Uniform luminous, reasonable light distribution, good glare control.

4. Internal power driver in the lamp, light weight and beautifull appearance, easy installation and maintenance

• Don’t take the tube apart
• Recommend indoor use
• The tube must work under the right voltage according

to the specification.

• Can be placed in conventional T8 or T10 fluorescent brackets

        (remove starter before replacement !)

• Warning : risk of electric shock! ensure that the power supply is off when wiring sections of
• this device.this device is to be installed by a qualified electrician or technician in accordance
• with all relevant local codes. please read this user guide completely prior to installation and
• please pre-plan the installation.
• Note: please remove Bi-pin shipping protectors from end of tubes prior to installation

Unpacking

• 1. Unpack and carefully examine the product
• 2. Report any damage and save all packing materials if any part is damaged during transport
• 3. Do not attempt to use this apparatus if it is damaged
• Before you start: Installation of your new LED tube is simple, but requires a basic knowledge of
• wiring(as shown below).if you do not feel comfortable with this type of wiring, Sanding LED
• would recommend consulting a qualified electrician.

Note:  please ensure that power is disconnected from fitting before installing LED tube

Mechanical Dimensions

  T8 1.2M LED Tube Light

tube length: L1=1198±1mm

total length: L2=1212±1mm

lighting length: L3=1160±1mm

tube diameter: Φ1=26mm/30MM

end cap diameter: Φ2=29mm/33MM

Tube material: Aluminum alloy

cover material: PC

Induction Sketch

Remark: motion sensor led tube is not workable in the fixture with Cover

     (workable)                     (unworkable)